FENGHUA FLUID AUTOMATIC CONTROL CO.,LTD
FENGHUA FLUID AUTOMATIC CONTROL CO.,LTD Solution Pneumatic Automation&Fluid Control System
Add to Cart
TN Double Shaft Pneumatic Gas Cylinder 10mm - 32mm For Pneumatic Automation System
Airtac type TN double shaft double acting Pneumatic air cylinder Bore size 10mm-32mm e.g. TN20-50-S with magnet and Guided rod plate
Quick Detail:
* TN Double rod air cylinder with Guided rod plate airtac interchange.
* High precision make sure linear moving excellently
* Good performance in distortion-resistance, twisting-resistance
* With slot on cylinder for mounting sensors
* Design to bear side load performance
* Multi-position mounting hole easily for installation.
* With magnet and rubber cushion
* Piston rod #45(ASTM-1045) steel chrome-plated
* Stainless steel piston rod is available
* With self-lubricating bearing,lubrication free
* Bore size 10mm,16mm,20mm,25mm,32mm,40mm
Specifications:
| ORDERING CODE | |||
| TN | 20 | 50 | S |
| TN:Double shaft standard | Bore Size | Stroke | S:With Magnet |
| 10:10mm | |||
| 16:16mm | |||
| 20:20mm | |||
| 25:25mm | |||
| 32:32mm | |||
| SPECIFICATION | |||||
| Bore size(mm) | 10 | 16 | 20 | 25 | 32 |
| working Medium | Filtered compressed air | ||||
| Motion Pattern | Double action | ||||
| Pressure Endurance | 1.5MPa | ||||
| Operating pressure range | 0.1~1.0MPa | ||||
| Ambient Temperature | -5~70ºC | ||||
| Buffer cushioning | NONE | Rubber buffer | |||
| Operating Speed | 100~500mm/s | ||||
| Adjustable stroke | -10~0mm | ||||
| None-Rotation Precision | 0.4º | 0.3º | |||
| Port size | M5X0.8 | G1/8 | |||
| Bore size | A | B | C | D | E |
| |||||||||||
| 10 | 20 | 30 | 40 | 50 | 60 | 70 |
| ||||||||||
| 10 | 63 | 12 | 51 | 10 | 30 | 30 | 35 | 40 | 45 | 50 | 55 |
| |||||
| Bore size | A | B | C | D | E | F | |||||||||||
| 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 125 | 150 | ||||||
| 16 | 68 | 15 | 53 | 20 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 87.5 | 100 | 8 |
| 20 | 78 | 20 | 58 | 20 | 35 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 87.5 | 100 | 10 |
| 25 | 81 | 19 | 62 | 30 | 40 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 92.5 | 105 | 10 |
| Bore size | J | K | L | M | N1 | N2 | P1 | P2 | Q | R | S | T | V | W | G | H | I |
| 16 | M4×0.7dp 5 | 47 | 53 | 20 | 22 | 11 | (Both sides):φ7.5(dp) 7.2mm | (Both sides):φ8(dp) 4.4mm | 34 | 3 | 54 | 21 | 8 | 6.1 | 47 | 6 | 24 |
| (Thru.hole): φ4.5 | (Thru.hole): φ4.5 | ||||||||||||||||
| 20 | M4×0.7/dp 5 | 55 | 61 | 24 | 25 | 12 | (Both sides):φ7.5(dp) 7.2mm | (Both sides):φ8(dp) 4.4mm | 44 | 3.5 | 62 | 25 | 10 | 8.1 | 55
| 9 | 28 |
| (Thru.hole): φ4.5 | (Thru.hole): φ4.5 | ||||||||||||||||
| 25 | M4×0.7/dp 6 | 66 | 72 | 29 | 27 | 12 | (Both sides):φ7.5(dp) 7.2mm | (Both sides):φ8(dp) 4.4mm | 56 | 7 | 73 | 30 | 12 | 10.2 | 66 | 8 | 34 |
| (Thru.hole): φ4.5 | (Thru.hole): φ4.5 | ||||||||||||||||
| Bore size | A | B | C | D | E
| ||||||||||||
| 10 | 10 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 125 | 150
| ||||||
| 32 | 108 | 30 | 78 | 35 | 45 | 10 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 103 | 115
| |